10.Oct.2023
We included basic definitions in the previous two articles. We introduced the MQ-135 Gas sensor. We have examined the basic definitions of air quality.
In this article, we will read values from an environment with the MQ-135 gas sensor and the temperature-humidity sensor DHT-11 connected to a microcontroller. We will send these values to the HC-05 Bluetooth module at certain time intervals.
Links:
DHT-11 module "S" pin is connected to Arduino's digital pin 2,
MQ-135 module A0 pin is connected to Arduino's A0 Analog input,
HC-05 Bluetooth module TX- will be connected to digital pin 11 of Arduino, and RX will be connected to digital pin 10.
Arduino codes are below. The values read from DHT-11and MQ-135 sensors are sent to the HC-05 module in JSON format. In the Andoid application to be designed later, the data in JSON format read from the Bluetooth module can be visualized graphically.
#include <dht.h> // Library for DHT-11 sensor
#include <SoftwareSerial.h> // Library for HC-05 Bluetooth module
#include <ArduinoJson.h> // Library for JSON processing
dht DHT;
#define DHT11_PIN 2 // Data pin of DHT-11 sensor
#define CO2_PIN A0 // Data pin of MQ-135 sensor
SoftwareSerial BTSerial(10, 11); // RX and TX pins of the Bluetooth module
void setup() {
BTSerial.begin(9600); // initialize the Bluetooth module
}
void loop() {
delay(5000); // 5 second cooldown
// Read temperature and humidity data
int16_t humidity=0;
int16_t temperature=0;
DHT.read11(DHT11_PIN, &temperature, &humidity);
// Read CO2 density
int CO2Value=analogRead(CO2_PIN);
// Create JSON object
StaticJsonDocument<128> jsonDoc;
jsonDoc["Temperature"]=temperature;
jsonDoc["Humidity"]=humidity;
jsonDoc["CO2_Density"]=CO2Value;
// Send JSON data over Bluetooth
serializeJson(jsonDoc, BTSerial);
BTSerial.println(); //Add new line to indicate end of data
}
This code adds the DHT-11 temperature and humidity sensor data, the MQ-135 CO2 sensor data to a JSON object, and then sends this JSON data over Bluetooth. JSON data is stored under the keys "Temperature", "Humidity" and "CO2_Density", and the values of the data are included with these keys.
Designing an Air Quality Measurement System 4 – Air Quality Monitoring Mobile Application
Mobile programming Fundamentals for Control Applications
Fundamentals of mobile application development for control of electronic systems
05.04.2023
With the Flutter-Dart language, can we write an artificial intelligence program that takes a picture and lists the objects in it?
Flutter-Dart language, artificial intelligence program
06.04.2023
Writing Applications that control Electronic Devices with Flutter-Dart Programming Language
Controlling Electronic Devices remotely
06.04.2023
Controlling Wifi Devices with Flutter-Dart
Control of remote devices with Android apps, Wifi-based control applications
07.04.2023
Developing an Application to Send Data to a Bluetooth-enabled Thermal Printer with Flutter
Mobile app developed with Flutter explains the step-by-step process of sending text to a Bluetooth-enabled thermal printer. Contains information about printer commands and Bluetooth communications
11.01.2024
Application Development Example with Flutter and Arduino
Learn to connect mobile devices with embedded systems! In this article, learn step by step how to develop an app using Flutter and Arduino
01.03.2024
Bluetooth Speaker Project with Flutter - Audio data transfer
In this project we will try to understand how the Bluetooth speaker system is designed and how to develop it. We will examine the basics of Android programming, MCU programming-embedded system design.
24.07.2023
Extracting Data from Database and Creating Graphs with Flutter and PHP
Learn how to pull data from a database and create a line chart using Flutter and PHP
27.08.2023
IoT System Design 1 – Temperature and Humidity Monitoring System
IoT system design with ESP 12f. Monitoring of temperature, humidity in web & mobile. Arduino, DHT11 sensor.
30.08.2023
IoT System Design 2- Sending Temperature and Humidity Data to Web Server with Arduino
Learn the steps to send temperature and humidity data from DHT11 sensor with Arduino to web server via ESP 12f
30.08.2023
IoT System Design 3- Data Processing on the Web Server Side
Learn to transmit data from DHT11 sensor with Arduino to web server via ESP8266 and save it to database with PHP.
30.08.2023
IoT System Design 4- Creating a Web Interface
Learn how data is pulled from the IoT system and used graphically.
30.08.2023
IoT System Design 5- Mobile Application Visualizing IoT Data with Flutter
Code descriptions of an application that pulls, graphs, and lists IoT data with Flutter.
30.08.2023
Mobile Application Development for Smart Homes
In this article, you can find the steps and examples of mobile application development using WiFi communication
01.09.2023
Developing Mobile Applications with Artificial Intelligence – Voltmeter Interface Application
The mobile application developed with artificial intelligence visualizes the microcontroller volt measurement with numerical data.
12.09.2023
Mobile Application Interface Development Study for Smart Homes
Ways to develop mobile applications with Flutter for smart home and workplace systems
16.09.2023
Designing an Air Quality Measurement System 1 – Basic definitions of Air Quality
Air Quality Measurement System design and air quality parameters. PM2.5, CO, NO2, O3, SO2 measurement
02.10.2023
Designing an Air Quality Measurement System 2- MQ-135 Gas Sensor Review
MQ-135 Gas Sensor: A powerful sensor used to monitor air quality and detect gases. Offers precise measurement
02.10.2023
Designing an Air Quality Measurement System 4 – Air Quality Monitoring Mobile Application
Air Quality Monitoring Mobile Application. Receive air quality data via Bluetooth, parse it in JSON format
10.10.2023